Introduction cp6004-sa – Kontron CP6004-SA User Manual
Page 32
Introduction
CP6004-SA
Page 1 - 14
ID 1052-8529, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
IPMI
IPMI Controller
•
NXP® ARM7 microcontroller with redundant 512 kB firmware flash and
automatic roll-back strategy
•
The IPMI controller carries out IPMI commands such as monitoring sev-
eral onboard temperature conditions, board voltages and the power
supply status, and managing hot swap operations.
•
The IPMI controller is accessible via two IPMBs (through the J1 and J2
connectors) and one host Keyboard Controller Style (KCS) Interface.
Thermal
Thermal Management
CPU and board overtemperature protection is provided by:
•
Temperature sensors integrated in the 3
rd
generation Intel® Core™ i7/i5
processor:
•
One temperature sensor for monitoring each processor core
•
One temperature sensor for monitoring the graphics core
•
One temperature sensor for monitoring the package die temperature
•
One temperature sensor integrated in the Intel® QM77 Chipset for mon-
itoring the chipset
•
One onboard temperature sensor for monitoring the board temperature
•
Specially designed heat sink
Securit
y
TPM
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
So
ftwa
re
uEFI BIOS
AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
•
LAN boot capability for diskless systems (standard PXE)
•
Redundant image; automatic fail-safe recovery in case of a damaged
image
•
Non-volatile storage of setting in the SPI boot flash (battery only re-
quired for the RTC)
•
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
ity based on AMIBIOS8
•
Command shell for diagnostics and configuration
•
uEFI shell commands executable from mass storage device in a Pre-OS
environment (open interface)
•
IPMI support in the command shell
Software IPMI
IPMI firmware providing the following features:
•
The IPMI controller is accessible via up to two IPMBs, IOL and one KCS
interface with interrupt support
•
The IPMI firmware can be updated in the field through all supported
onboard interfaces using the update functions of the open-source tool
“ipmitool”. For further information on the ipmitool refer to the
sourceforge.net web site.
•
Two IPMI controller flash banks with automatic roll-back capability in
case of an upgrade firmware failure
•
Board supervision and control extensions such as board reset, power
and SPI boot flash control, etc.
Operating Systems
The board is offered with various Board Support Packages including Windows,
VxWorks and Linux operating systems. For further information concerning the
operating systems available for the CP6004-SA, please contact Kontron.
Table 1-1:
CP6004-SA Main Specifications (Continued)
FEATURES
SPECIFICATIONS