Kontron CP6004-SA - Manual (Page 21)

CP6004-SA Introduction
ID 1052-8529, Rev. 2.0 Page 1 - 3
D R A F T — F O R I N T E R N A L U S E O N L Y
1. Introduction
1.1 Board Overview
The CP6004-SA (Standard Air-Cooled) is a highly integrated 6U CompactPCI system controller
board based on the 3
rd generation Intel® Core™ i7 and i5 processors combined with the mobile
Intel® QM77 Express Chipset.
The board supports the Intel® Core™ i7-3615QE quad-core processor with 2.3 GHz, the Intel®
Core™ i7-3612QE quad-core processor with 2.1 GHz, the Intel® Core™ i7-3555LE dual-core
processor with 2.5 GHz, and the Intel® Core™ i5-3610ME dual-core processor with 2.7 GHz. All
processors are built on 22-nm technology and provided in a BGA package. The processor is
soldered on the CP6004-SA which results in a higher Mean Time Between Failures (MTBF)
and a significant improvement in cooling.
Two SODIMM sockets are available on the CP6004-SA to provide up to 16 GB dual-channel,
DDR3 memory with Error Checking and Correction (ECC) running at 1600 MHz. The graphics
controller and the memory controller are integrated in the processor. Furthermore, either one
2.5" HDD/SSD or up to 64 GB NAND flash memory (SSD) via a SATA Flash module can be
integrated onto the CP6004-SA.
For maximum application flexibility, the CP6004-SA comes with an extensive range of inter-
faces such as up to five Gigabit Ethernet ports (three on front I/O and two on rear I/O in com-
pliance with PICMG 2.16), three high-resolution graphics interfaces (VGA, 2 x HDMI/DVI), two
COM ports (RS-232 on front and rear I/O), and six SATA interfaces with RAID 0/1/5/10 func-
tionality, one for the onboard SATA connector, one for the SATA Flash module or the 2.5" HDD/
SSD, and four for rear I/O. In addition, six USB 2.0 ports are available on the board, two on
front I/O and four on rear I/O.
Support for one PMC/XMC module ensures individual system expansion either via one 64-bit/
66 MHz PCI or 64-bit/133 MHz PCI-X PMC interface or via one XMC interface utilizing a x8
lane PCI Express 2.0 interconnection.
The board supports a configurable 64-bit/66 MHz PCI or PCI-X hot swap CompactPCI inter-
face. When installed in the system slot, the interface is enabled, and when installed in a periph-
eral slot, the CP6004-SA is isolated from the CompactPCI bus.
Safety and security features via a Trusted Platform Module (TPM) 1.2 are provided on request.
Intelligent Platform Management Interface (IPMI) is supported as well.
Designed for stability, the board fits into applications situated in industrial environments, includ-
ing I/O intensive applications where only one slot is available for the CPU, making it a perfect
core technology for long-life applications. Components with high temperature tolerance have
been selected from embedded technology programs, and therefore offer long-term availability.
The board is offered with various Board Support Packages including Windows, VxWorks and
Linux operating systems. For further information concerning the operating systems available for
the CP6004-SA, please contact Kontron.