Kontron CP6004-SA - Manual (Page 25)

CP6004-SA Introduction
ID 1052-8529, Rev. 2.0 Page 1 - 7
D R A F T — F O R I N T E R N A L U S E O N L Y
1.4.2 Front Panel
Figure 1-2: CP6004-SA Front Panel
Legend
IPMI LEDs
I0/I1 (red/green): Indicate the software status of the
IPMI controller
Status LEDs
WD (green): Watchdog Status
TH (red/green): Temperature Status
HS (blue): Hot Swap Control
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (green/orange/off): Ethernet Speed
General Purpose LEDs
LED 0..3 (red/green/amber): General Purpose/POST code
Note ...
If the General Purpose LEDs are lit red during
boot-up, a failure is indicated before the uEFI
BIOS has started.
For further information, please contact Kontron.