Kontron CP6003-RC uEFI BIOS - Manual (Page 11)

CP6003-SA/RA/RC uEFI BIOS Starting uEFI BIOS Setup
ID 1045-9149, Rev. 2.0 Page 11
P R E L I M I N A R Y
1.2 Navigation
The CP6003-SA/RA/RC uEFI BIOS setup program uses a hot key-based navigation system. A
hot key legend is located in the right frame on most setup screens.The following table provides
information concerning the usage of these hot keys.
HOT KEY DESCRIPTION
The key is used to invoke the General Help window.
The key is used to restore the previous values.
The key is used to load the defaults.
The key is used to save the current settings and exit the uEFI BIOS Setup.

Left/Right The Left and Right keys are used to select a major Setup screen.
For example: Main Screen, Boot Screen, Security Screen, etc.

Up/Down The Up and Down keys are used to select a Setup function or a sub-screen.
+ -
Plus/Minus The Plus and Minus keys are used to change the field value of a particular Setup
function, for example, system date and time.
The key is used to exit a menu or the uEFI BIOS Setup.
Pressing the key in a sub-menu causes the next higher menu level to be displayed.
When the key is pressed in a major Setup menu, the uEFI BIOS Setup is terminated
without saving any changes made.
The key is used to execute a command or select a menu.