Rear turn signal and backup lamp, License lamps, Center high-mounted stoplamp – Jeep 2015 Compass - Owner Manual User Manual

Page 527

Text mode
Original mode

Rear Turn Signal And Backup Lamp

1. Remove the two push-pins from the taillamp housing.

2. Grasp the taillamp and pull firmly to disengage the

lamp from the aperture panel.

3. Twist and remove socket from lamp.
4. Remove bulb from socket and replace.
License Lamps

1. Use a screw driver to gently pry against the side of the

snap tab to remove the lamp from the liftgate.

2. Rotate the socket 1/4 turn counterclockwise.
3. Pull bulb from socket.
Center High-Mounted Stoplamp
This light is an LED assembly. See your authorized dealer

for replacement.

Taillamp Push-Pins

MAINTAINING YOUR VEHICLE 525