beautypg.com

Time button, Clock setting procedure, Rw/ff – Jeep 2015 Compass - Owner Manual User Manual

Page 270: Tune control, Setting the tone, balance and fade

background image

another selection. Holding either button will bypass

stations without stopping, until you release it.
TIME Button
Push the TIME button to alternate display of the time and

radio frequency.
Clock Setting Procedure

1. Push and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/

SCROLL control knob.

3. After adjusting the hours, push the right side TUNE/

SCROLL control knob to set the minutes. The minutes

will begin to blink.

4. Adjust the minutes using the right side TUNE/

SCROLL control knob. Push the TUNE/SCROLL con-

trol knob to save time change.

5. To exit, push any button/knob, or wait five seconds.
RW/FF
Pushing the RW (Rewind) or FF (Fast Forward) buttons

causes the tuner to search for the next frequency in the

direction of the arrows. This feature operates in either

AM or FM frequencies.
TUNE Control
Turn the rotary TUNE/SCROLL control knob clockwise

to increase or counterclockwise to decrease the frequency.
Setting The Tone, Balance And Fade
Push the rotary TUNE/SCROLL control knob and BASS

will display. Turn the TUNE/SCROLL control knob to

the right or left to increase or decrease the bass tones.

268 UNDERSTANDING YOUR INSTRUMENT PANEL