beautypg.com

Operating instructions — radio mode, Power switch/volume control (rotary), Electronic volume control – Jeep 2015 Compass - Owner Manual User Manual

Page 248: Seek buttons, Scan button

background image

Operating Instructions — Radio Mode

NOTE:

The ignition switch must be in the ON or ACC

position to operate the radio.
Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the

radio. Push the ON/VOLUME control knob a second

time to turn off the radio.
Electronic Volume Control
The electronic volume control turns continuously (360

degrees) in either direction without stopping. Turning the

ON/VOLUME control knob to the right increases the

volume and to the left decreases it.
When the audio system is turned ON, the sound will be

set at the same volume level as last played.

SEEK Buttons
Push and release the SEEK buttons to search for the next

listenable station in AM/FM mode. Push the right switch

to seek up and the left switch to seek down. The radio

will remain tuned to the new station until you make

another selection. Holding either button will bypass

stations without stopping, until you release it.
SCAN Button
Pushing the SCAN button causes the tuner to search for

the next listenable station in AM, FM or Satellite (if

equipped) frequencies, pausing for five seconds at each

listenable station before continuing to the next. To stop

the search, push the SCAN button a second time.

246 UNDERSTANDING YOUR INSTRUMENT PANEL