Jeep 2014 Wrangler - Owner Manual - Manual (Page 282)

8. Standing on the side of the vehicle, lift the top by the
side bow until it rests on the windshield frame.
9. Open the header latches and engage the hook on each
side onto the windshield loops (do not close the
latches).
10. If the swing gate brackets were removed, install them
by hooking the rear edge of the bracket on the interior
side of the body channel. Then, rotate it rearward and
over the channel until it snaps onto the exterior part of
the rail. To be properly located, the bracket must only
be clipped to the shortened rail edge.
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE