To lock the doors and swing gate – Jeep 2014 Wrangler - Owner Manual User Manual

Page 28

2. Continue to hold the RKE transmitter LOCK button

for at least four seconds, but not longer than 10
seconds, then press and hold the RKE transmitter
UNLOCK button.

3. Release both buttons at the same time.

4. Test this feature while outside of the vehicle by

pressing the LOCK/UNLOCK button on the RKE
transmitter.

NOTE:

Pressing the RKE transmitter LOCK button while

you are inside of the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
Alarm activated will cause the alarm to sound. Press the
RKE transmitter UNLOCK button to deactivate the Ve-
hicle Security Alarm.

5. If the desired programming was not achieved or to

reactivate this feature, repeat the above steps.

NOTE:

Pressing the RKE transmitter LOCK button while

To Lock The Doors And Swing Gate

Press and release the LOCK button on the RKE transmit-
ter to lock all doors. The turn signals will flash and the
horn will chirp once to acknowledge the lock signal.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE