Jeep 2014 Wrangler - Owner Manual - Manual (Page 199)

b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of
the bows facing upward.
c. Reattach the knuckles onto the metal pivot brackets.
NOTE: To aid in reattaching the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
d. Screw the pivot screws back into place using a #T30
Torx® head driver. Secure them until they are snug,
being careful not to cross-thread the screws or
overtighten.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197