Jeep 2014 Grand Cherokee SRT - User Guide - Manual (Page 63)

7. Wait for the beep, and then dictate any message up to 140 characters. If you
exceed 140 characters, you will hear the following prompt: “Message was too
long; your message will be truncated.”
8. Uconnect ® will then repeat the message back to you.
9. Uconnect ® will prompt you: “To add to your message, say “Continue”; To delete
the current message and start over, say “Start Over”; to send the current message,
say “Send”; to hear the message again, say “Repeat”.
10. If you are happy with your message and would like to send it, wait for the beep
and say “Send”.
11. Uconnect ® will then say “Sending your message.”
Sample Commands For Voice Text Reply And Voice Texting
Example Command Action
“Text John Smith”
Send a message to specific contact in
address book
“Text 123 - 456 - 7890”
Send 123 - 456 - 7890 a message
from your phonebook
“Show messages”
See recent text messages listed by
number on Uconnect ® screen
“Listen to/view (message number four,
for example)”
Hear messages or read it on
Uconnect ® screen
“Reply”
Send a voice text reply to a
current message
“Forward text/message to “John Smith”
Forward current text to specific
contact in address book
“Forward text/message to
“123 - 456 - 7890”
Forward current text to specific
phone number
Uconnect® Access Via Mobile (If Equipped — Available On Uconnect® 8.4A And
Uconnect® 8.4AN)
Uconnect ® Access via Mobile offers additional apps such as Aha™, iHeartRadio,
Pandora ® and Slacker Radio. It uses your smartphone’s existing data plan to access
Uconnect ® System-enabled apps, which you can control using both your touchscreen
and steering wheel controls. Customer’s data plan charges will apply.
To get started using Via Mobile apps, first register your Uconnect ® Access system
where you'll be guided through the setup of your Via Mobile (requires a compatible
Android or iPhone
® smartphone). Please refer to “Uconnect ® Access Registration”
for more information.
ELECTRONICS
61