beautypg.com

To set a desired acc speed – Jeep 2014 Grand Cherokee - Owner Manual User Manual

Page 194

background image

WARNING!

Leaving the Adaptive Cruise Control (ACC) system
on when not in use is dangerous. You could acciden-
tally set the system or cause it to go faster than you

(Continued)

WARNING! (Continued)

want. You could lose control and have a collision.
Always leave the system off when you are not using
it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired, push the
SET + button or the SET - button and release. The EVIC
will display the set speed.

If the system is Set when the vehicle speed is below
20 mph (32 km/h), the Set Speed shall be defaulted to
20 mph (32 km/h). If the system is Set when the vehicle
speed is above 20 mph (32 km/h), the Set Speed shall be
the current speed of the vehicle.

NOTE:

ACC cannot be set if there is a stationary vehicle

in front of your vehicle in close proximity.

Adaptive Cruise Control Off

192

UNDERSTANDING THE FEATURES OF YOUR VEHICLE