beautypg.com

Alignment and balance, Tire chains – Jeep 2007 Wrangler User Manual

Page 315

background image

CAUTION!

Replacing original tires with tires of a different size
may result in false speedometer and odometer
readings.

Alignment and Balance

Poor suspension alignment may result in:

• Fast tire wear.
• Uneven tire wear, such as feathering and one-sided

wear.

• Vehicle pull to right or left.

Tires may also cause the vehicle to pull left or right.
Alignment will not correct this problem. See your autho-
rized dealer for proper diagnosis.

Improper alignment will not cause vehicle vibration.
Vibration may be a result of tire and wheel out-of-
balance. Proper balancing will reduce vibration and
avoid tire cupping and spotty wear.

TIRE CHAINS

Install chains on rear tires only. Tire chains may be
installed on all models except the Sahara and Rubicon.
Follow these recommendations to guard against damage
and excessive tire and chain wear:

• Use chains on P225/75R16 tires only. P245/75R16,

P255/75R17, P255/70R18, and LT255/75R17 tires do
not provide adequate clearance.

• Use SAE class “S” tire chains or traction devices only.
• Chains must be the proper size for the vehicle, as

recommended by the chain manufacturer.

• Follow tire chain manufacturer’s instructions for

mounting chains.

STARTING AND OPERATING

315

5