Battery replacement – Jeep 2007 Wrangler User Manual

Page 25

Text mode
Original mode

Battery Replacement

The recommended replacement battery is CR2032.

NOTE:

Perchlorate Material – special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

1. If the key fob is equipped with a screw, remove the
screw. With the transmitter buttons facing down, use a
flat blade (screw driver) to pry the two halves of the
transmitter apart. Use extreme care not to damage the
seal or internal components.

2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.

Separating Transmitter Halves

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE