Jeep 2007 Wrangler User Manual
Page 112
High Range (4WD Models) or 2WD Models
On
This is the normal operating mode for ESP in 4WD high
range and in 2WD vehicles. Whenever the vehicle is
started or the transfer case (if equipped) is shifted from
4WD low range or neutral back to 4WD high range, the
ESP system will be in this mode. This mode should be
used for most all driving situations. ESP should only be
turned to “Partial Off” or “Full Off” for specific reasons
as noted below.
Partial Off
This mode is entered by momentarily depressing the
ЉESP Control SwitchЉ. When in ЉPartial OffЉ mode, the
TCS portion of ESP has been disabled and the
Љ will be illuminated. All other stability
conditions and more wheel spin than ESP would nor-
mally allow is required to gain traction. To turn ESP on
again, momentarily depress the
ЉESP Control SwitchЉ.
This will restore the normal “ESP On” mode of operation.
ESP Control Switch
112
UNDERSTANDING THE FEATURES OF YOUR VEHICLE