Jeep 2007 Wrangler - Manual (Page 192)

Raising The Windshield And Replacing Side Bars
1. Raise the windshield.
2. Loosely attach rear of side bar to sport bar. Refer to
Step 4 of “Lowering Windshield and Removing Side
Bars” earlier in this section.
• Reattach sport bar Velcro covering.
3. Attach front of side bar to windshield frame.
• Install top two (2) hex bolts (13mm) first, then lower
side hex bolt (13mm). Lower side bolt will not align
until top two bolts are installed.
4. Tighten all side bar attachment bolts.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE