Jeep 2004 Wrangler User Manual

Page 57

Parking Lights, Instrument Panel Lights, and
Headlights

Turn the end of the multi-function control lever to the
first detent for parking lights and instrument panel
lights. Turn to the second detent for headlight operation.

To change the brightness of the instrument panel lights,
rotate the center portion of the muti-function control
lever up or down.

NOTE:

If the driver’s door is left open, and the head-

lights or parking lights are left on, the “High Beam
Indicator Light” will flash and a chime will sound.

Lights-On Reminder

If the headlights or parking lights are on after the ignition
is turned off, a chime will sound when the driver’s door
is opened.

Headlight Dimmer Switch

Pull the multi-function control lever towards you to
switch the headlights to HIGH beam. Pull the muti-
function control lever a second time to switch the head-
lights to LOW beam.

Passing Light

You can signal another vehicle with your headlights by
lightly pulling the multi-function control lever toward
the steering wheel. This will cause the headlights to turn
on at high beam and remain on until the lever is released.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE