Hollywood Racks Giant Revive - Manual (Page 4)

Removing the bikes and rack
To remove the bikes, carefully undo the tie down straps. Be careful with the rotation of the
handlebars per fig. 7. To remove the rack, loosen and rotate the anti-sway bar so it is laying next
to the support arm. Next, press the tab on the spring loaded buckles and loosen the straps.
Remove the rack from the car, then loosen both the adjustment knobs and fold the rack up for
easy storage.
Caution: This bicycle rack is designed to carry up to two Revive bicycles. Do not attempt to carry
motorcycles, scooters, mopeds, motorized wheelchairs, or other heavy objects. Always check
the condition of the straps and stitching and replace as necessary. This rack is not to be mounted
to any trailer or towed vehicle!
Carrying conventional bikes: This product has been specifically designed for the Revive bike
frame. Although the rack does have the carrying capacity for conventional bikes, the spacing of
the arms may prevent carrying of conventional bikes. Giant Bicycles and Hollywood Racks
do not guarantee that conventional bi
cycles will “fit” this rack.
Carrying other recumbent bikes: This product has been specifically designed for the Revive
bike frame. Some recumbent bikes may fit, others may be wider than your vehicle and beyond
the legal width limit of your particular state. Giant Bicycles and Hollywood Racks do not
guarantee that other brands of recumbent bicycles will “fit” this rack. Giant Bicycles and
Hollywood Racks take no responsibility for any consequences due to the use of a non Revive
bike.
Limited One Year Warranty: This rack is warranted for a period of one year against defects in materials and
workmanship, effective from the date of purchase to the original purchaser. The manufacturer will repair or replace
any defective parts due to materials or workmanship. The manufacturer of this product shall not extend the warranty
to 1) Any failure or malfunction of the product do to any of or modifications to the product; or 2.) Damages not
attributable to a defect in materials or workmanship; or 3.) Damages resulting from improper installation on vehicle or
attachment of bicycles on rack. Consequential or Incidental Damages: The manufacturer shall not be liable for
any consequential or incidental damages in connection with the purchase, use or handling of this bike rack.
Purchaser’s Rights: Some states do not allow the exclusion or limitation of consequential or incidental damages
and the above limitation may not apply to you. This warranty gives you specific legal rights and you have other
rights, which vary from state to state.
This product is manufactured for Giant

Bicycles by Hollywood Engineering, Inc.
For customer service, please contact Hollywood Racks, NOT Giant Bicycles.
Tel. 800-747-4085 email: [email protected]
Business Hours: Monday – Friday 8:00 AM to 3:00 PM PST
Product of Taiwan  Manufactured Under License  Part No. 25446