Clarion CMD5 - Manual (Page 26)

Sirius Satellite Operations
26
CMD5
English
Switching the display
Each time you press the [DISP] button, the item
changes as following order:
Channel name and band/channel number
➜ category name and band/channel
number
➜ title and artist name ➜ radio text
and band/channel number
➜ clock display
➜ channel name and band/channel
number...
Notes:
• The Operation status indication of the source unit
displays the abbreviated channel name for 2
seconds when a station is selected before
returning to the previous display mode.
• Scrolling starts when the channel name or other
text has been displayed for 2 seconds. When
scrolling finishes, the first text display appears. To
start scrolling again, press and hold the [DISP]
button for 1 second or longer.
Channel selection
Channels are selected with the following buttons.
• The [
E] or [e] button
• The [DIRECT] buttons
• The [CAT] button
* For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning
There are 2 types of tuning modes available,
seek tuning and preset tuning.
Seek tuning
Only channels that can be received are selected
while channels without broadcasts and channels
not covered by the contract are automatically
skipped.
1. Press the [
E] or [e] button. The receiver
seeks the next available channel below or
above the current channel.
2. Press and hold the [
E] or [e] button. The
receiver moves to seek channels below or
above the current channel. If the channel
found when either button is released is
available that channel is received. Otherwise,
seeking continues until an available channel
is found.
Recalling a preset channel
A total of 18 SIRIUS channels can be stored (6-
SR1, 6-SR2 and 6-SR3). This allows you to
select your favorite SIRIUS channels and store
them in memory for later recall.
1. Press the [SAT] button and select the desired
SIRIUS band (SR1, SR2 or SR3).
2. To recall a stored SIRIUS channel, press the
desired [DIRECT] button to select that
channel.
* Press and hold one of the [DIRECT] buttons for
2 seconds or longer to store the current
channel into preset memory.
Manual memory
1. Select the desired channel with seek tuning or
preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
channel into preset memory.
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting channel, the display
may show a channel name that differs from the
stored name.
• A channel stored in memory may be discontinued
at the option of the broadcasting channel.
Category selection function
Sirius Satellite allows you to select broadcast
channel category (contents).
Receiving channels selected by
category
This starts seek tuning and broadcast channels
that meet the specified category are selected.
The “CAT” indicator is displayed during the
category selection mode.
1. Press the [CAT] button to enter the category
selection mode.
2. Turn the [VOLUME] knob clockwise or
counterclockwise to select a category. Or,
press a [DIRECT] button if the category is
preset.
* When 1 second has passed after selecting the
category, UP SEEK is automatically
performed, and a channel of the selected
category is received. You can also perform
seeking by using the [
E] or [e] button.
3. Press the [CAT] button again to cancel.