Clarion CMD5 - Manual (Page 16)

Radio Operations
16
CMD5
English
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio stations
in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1. Press the [AM/FM] button and select the
desired band (FM or AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
* Press and hold one of the [DIRECT] buttons for
2 seconds or longer to store the current station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored stations remain at the memory
position.
1. Press the [AM/FM] button and select the
desired band (FM or AM).
2. Press and hold the [ENT] button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [ENT] button.
2. When a desired station is tuned in, press the
[ENT] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [ENT] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.