Clarion CMD5 - Manual (Page 24)

Common Operations
24
CMD5
English
Performing memory reset
This function allows you to reset adjusted
settings in the ROM.
The stored settings like preset channels,
adjusted areas, ISR memories, adjust mode
settings and sound mode settings can be
formatted by this function.
Note:
• The settings will remain in the ROM even if you
turn the power off or press the reset button.
1. Press the [MENU] button to switch to the
menu mode.
2. Press the [
E] or [e] button to select “RESET”.
3. Press and hold the [ENT] button.
The power will be turned off automatically.
Performing a system check
This function verifies the devices hooked up
through CeNET.
1. Press the [MENU] button to switch to the
menu mode.
2. Press the [
E] or [e] button to select “SYSTEM
CHECK”.
3. Press and hold the [ENT] button for 1 second
or longer.
CeNET connection configuration is
automatically checked.
When the system check is complete, the
display returns to the previous mode.