Gastroback 46008 Design Vakuum Sealer Plus User Manual

Page 16

If you use the container (art.-no.: 46111), plug the other end of

the vacuum hose into the center hole of the rotary switch on the

lid of the container (picture P). Make sure that the switch is

turned to the position »SEAL«. You can choose between: »DRY«,

»MOIST«, »SOFT«, »DELICATE«. If you make no selection, the

setting of »DRY« is automatically selected - the indicator light

illuminates green. Press the »CANISTER SWITCH« button (pic-

ture m) on the right side of the appliance. The vacuum pump

starts to operate audibly. Press for a few seconds at the start of

the vacuum process easily on the container lid or on the hose

adapter to ensure that no air escapes from a gap or the hose is

loose. When the maximum vacuum has been reached, the pro-

cess will be terminated automatically. The foods are now vacuum

packed in the container.
note: To test the vacuum, you can try to move the lid - it should

not move.
5.

On canisters 46111 you have the option to label the date of

vakuuming on the lid of the containers (picture Q).
6.

Remove the vacuum hose from the container. If you wish to

vacuum seal another container, wait approximately 2 minutes to

let the appliance cool down. Thereafter, repeat the process.
7.

When you have finished vacuum sealing in containers, just

pull the small adapter of the vacuum hose upwards to remove it from the vacuum port.

manual vacuum

If you want to vacuum step by step and seal at a later time, press the »MANUAL VACUUM«

button (picture r). You can determine your self how much is to be vacuumed - eg for sen-

sitive foods. Press and hold the button - the indicator light illuminates green - the appliance

is vacuuming. Release the button, the appliance will stop immediately vacuuming up and

the indicator light turnes off. You can then seal the vacuum bag manually.

manual seal

If you do not want to vacuum, and seal only, eg for the production of a vakuumiing bags or

for additional welds on a bag press the »MANUAL SEAL« button. The indicator light for the

sealing function illuminates blue. Once the seal is completed, the light turns off.

Picture Q

Picture R

Picture P