Gastroback 41019 - Cook & Mix - Manual (Page 12)

40
Operation
Assembling the COOK & MIX
WARNING: Do not use the appliance if any part of it, especially the glass jar, is
damaged in any way (e.g. scratched, cracked, chipped, or leaking). Damaged parts
could break during operation and/or splinters could get into your foods and cause severe
injuries.
For operation always place the appliance on a level, stable, heat- and moisture-resistant
surface. Do not operate the appliance on inclined surfaces! Do not operate the
appliance under overhanging boards, lamps or near delicate objects to avoid damage
caused by splashes and condensate. Do not place the appliance on any power cord.
Always switch Off (Blender control dial to Off, then press the power button), unplug, and
let the appliance cool down, before assembling or disassembling. Do not place the hot
glass jar on any heat- or moisture-sensitive surface. To avoid overheating, do not switch
on the appliance when the glass jar is still empty.
1. Place the motor base on a flat, stable surface near a wall power outlet. (See:
„Important Safeguards“) Leave at least 30 cm of free space to walls, curtains, boards
and other objects on each side of the appliance. Leave at least 100 cm of free
space above the appliance to avoid damage due to splashes and steam.
2. Ensure that the appliance is switched Off (Blender control dial to Off position) and
unplugged.
3. Ensure that the glass jar is assembled correctly. (See. Care and Cleaning) If in doubt,
fill in some water to check the glass jar for leakage.
Before assembling the glass jar, always ensure that the sealing surfaces on the brim of
the jar collar and glass container are clean and neat, and are not scratched, chapped,
cracked or frayed out. Then screw the glass container on the jar collar.
Making Dishes
WARNING: Before operation always ensure that the appliance is assembled correctly
and completely according to the instructions in this booklet. Do not move or tilt the
appliance with the glass jar mounted on the motor base to avoid that the
glass jar will fall or hot liquid will be spilled. Always ensure that the lid is closed
firmly and the measuring cup is in place properly, before operating the
appliance. Otherwise, food could splash and overflow. Do not spill any liquids on the
appliance or let any liquids run down on the exterior of the appliance. If liquids are spil-
led on the motor base, immediately switch Off and unplug the appliance.
If any liquid accumulates at the rear or under the motor base during operation, immedi-
ately switch Off and unplug the appliance. Thereafter empty the glass jar completely, let
the appliance cool down and clean the appliance. (See: „Care and Cleaning“) Ensure
that the glass jar is assembled correctly. (See: „Assembling the COOK & MIX“) Dry the
exterior of the appliance and the table thoroughly. If the problem persists, send the com-
plete appliance to an authorized service centre for repair.
Do not insert your hands or any foreign objects (e.g. clothes, cooking utensils)
in the glass jar, when the glass jar is mounted on the motor base and the
appliance is connected to the power supply. The heating plate in the jar collar