Gastroback 40969 Design Stand Mixer Advanced User Manual
Page 11

assembling the processing tools
Take the processing tool you want to use into your right hand. On the
top of the attachment of the processing tool is a cannelure (picture C).
The motor head drive has a matching guiding pin (picture D).
Slide the attachment of the processing tool over the drive of the motor
head (picture E). Ensure the guiding pin slides through the cannelure of the
attachment of the processing tool.
Push the processing tool upwards until the metal spiral compresses and you
are able to turn the processing tool anticlockwise (picture F).
The processing tool is properly assembled when the guiding pin is locked
in position (picture G).
Operating the appliance
Place the food into the bowl.
Grab hold of the motor head in front of the processing tool with your left
hand and rise the motor head slightly upwards.
NOtE: When the motor head is locked in position the head release lever
is locked as well. To release the head release lever slightly rise the motor
head.
Push the head release lever (picture H) with your right hand upwards. The
motor head is now released and you can lower it carefully.
NOtE: Do not drop the motor head. The motor head is very heavy and
the pivoted joint would get damaged if the motor head falls down with
active force.
Attach the splash guard to the top of the bowl, connect the power cord to
the outlet and turn the appliance ›On‹. Select a slow speed to start with and
slowly arise the speed level until reaching the desired speed.
Add ingredients sideways. For adding ingredients you do not need to
remove splash guard. For more information regard to ›Tips for usage‹.
CautION: Do not block the ventilation slits on the back of the appliance
and do not use the appliance in continuous operation for more than 10
minutes to avoid overheating. If processing large quantities of food, regu-
larly interrupt operation and unplug the appliance for a few minutes, to let
the motor cool down.
As soon as the food has the right consistency turn the appliance ›Off‹ by
turning the speed control anticlockwise into the ›Off‹-position (picture
I). Pull the plug.
attENtION: Never switch ›On‹ the appliance when the motor head is
raised and never raise the motor head when the appliance is in operational
mode. Risk of injury! Always ensure the appliance is switched ›Off‹ before raising or lowering
the motor head.
attENtION: Avoid contact the moving parts. Keep hands, hair, clothing, as well as spatula
and other utensils, away from beater, whisk or dough hook during operation to prevent
injury and/or damage to the mixer.
E
f
G
locked
release
lock
h
I
37