Operating – Gastroback 40969 Design Stand Mixer Advanced User Manual

Page 10

otherwise the ingredients will settle on the base of the cake pan. Flour sticky fruit before add-

ing them to the dough.
• For yeast dough and other heavy dough use dough hook only and a slow speed (max speed

lever 2). Overheating and overloading will damage the appliance.
• For best results warm up the bowl before making yeast dough. Therefore rinse the bowl with

hot water. For the case that the dough sticks to the dough hook keep on processing the dough

until smooth and even.
•

warNING:

Do not process hot food. Wait for the food to cool down. The rising steam

and condensation on the appliance can damage the appliance.
• Use the whisk for beating the white of eggs and ensure the bowl is dry and

clean. Slowly arise the speed up to level 8 - 10 and check the consistency

of the eggs. The white of egg is ready when it is stiff and shiny and when it

sticks to the whisk taking the whisk out of the bowl. Do not beat the white of

eggs too long otherwise the froth will irreversible separate from liquid.
• Chill the bowl when making whipped cream and only use chilled whipped

cream. Slowly arise the speed up to level 8 - 10 and check the consistency

of the whipped cream. The whipped cream is stiff when it sticks to the whisk

taking the whisk out of the bowl. Do not overprocess the whipped cream.

OpEratING

Before first use

Remove all promotional materials and packing as well as any foreign

objects, but do not remove the model label. Before first use and after a

long period of storage, clean the processing tools in warm soapy water

(see ›Care and Cleaning‹).

using the Design Stand Mixer advanced
warNING:

Always switch ›Off‹ the appliance, wait until the motor

stops completely and unplug the appliance before rising the motor head or

assembling/disassembling the processing tool. To turn the appliance ›Off‹

you have to turn the speed control anticlockwise into the ›Off‹-position.
Push the head release lever with your right hand upwards (picture A). Grab

hold to the motor head in front of the processing tool with your left hand

and rise the motor head until locked into position.
NOtE: Release the head release lever as soon as it is possible to rise the

motor head. The head release lever will lock in the lower position as soon

as the motor head is risen all the way up.

attaching the bowl

Take the bowl and place it on the bowl fitting. There are guiding pins on

the base of the bowl and matching cannelure on the bowl fitting. With

your right hand grab hold to the handle of the bowl and turn the bowl

clockwise until it fits tight to the bowl fitting and is locked in position

(picture B).
NOtE: Use the provided bowl only.

Guiding pin of the

motor head drive

release

lock

Cannelure of the

processing tool

tighten