beautypg.com

Working with the cook & mix plus – Gastroback 41020 Cook & Mix Plus User Manual

Page 12

background image

38

• It is recommended that you use the stir function while frying or sautéing onions, garlic or

other base ingredients at the start of your recipe.
• It is not ideal to use the stir button to blend the soup but it can be used if you require

chunky soup.
nOTe: For safety, do not use stir button longer than ten seconds on heat mode. Use stir

function intermittently.

Blending function
• Your COOK & MIX PLUS features 4 different speed levels and a PULSE-function, which

can be accessed with the rotary speed selector.
• For safety reasons, the blending function only works when the cooking or heating process

has completed.
• The heating plate can also manually be turned off by pressing the heat button currently in

use (lights will be illuminated) or alternatively pressing the ON/OFF power button.
• If the on/off power button is used to turn off the heater, the appliance will switch off

completely and will have to be re-started for blending.
• For safety reasons, when hot ingredients’ temperature is over 70° C, the max blending

speed can only reach level 2 even if you are on level 3 or level 4.
nOTe: Do not blend for longer than three minutes. This is the maximum running time for

the motor.
nOTe: Always turn the speed selector to position ›0‹ after working the appliance or

before the next use. Internal safeguard will prevent the appliance from mixing. This safe-

guard is installed to prevent any unintentional use and any damages while plugging the

appliance into the power outlet again.

wOrKIng wITH THe COOK & MIX PLUS

Making Soup

1. Place the motor housing onto a flat, sturdy surface.
2. Assemble the appliance and plug into a suitable outlet.
3. Press the ON/OFF button to set the appliance to ›stand-by‹ mode.
4. Select the required time, this can be adjusted throughout the cooking process, but a time

must be selected to start the heater initially.

nOTe: To fry ingredients such as onions or garlic, add butter or oil first before switching

on the heat mode. Make sure you place the butter on the heating plate rather than the

blades. Select low heat (›SIEDEN‹) setting to melt butter. If frying onions and garlic, add

and cook until softened, replacing the lid.
nOTe: The appliance may smoke a little and release a slight odour during first use, this

is normal.
5. To mix the onions or garlic, use the stir button (›RÜHREN‹) on the control panel.