beautypg.com

Gastroback 42606 Design Espresso Plus User Manual

Page 4

background image

34

impORTAnT wARninG nOTeS

• Never leave small children unsupervised with the appliance or the parts of the appliance!

Always make sure that the appliance is properly and fully assembled before you plug the

power cord into the outlet and turn on the appliance.
• Do

not remove the steam wand out of the milk, as long as steam escapes. Otherwise

hot milk may splash out of the frothing jug. Turn the steam dial always back to the starting

position (standby(O) position) before you remove the frothing jug from the steam wand. Se-

veral seconds after turning off the steam function a short burst of steam from the steam wand

occurs. Be careful not to scald yourself on the hot steam.
• The metal parts of the portafilter will be very hot during and after operation. Grasp the

hot portafilter only on the black handle. Cool the portafilter and the filter insert in cold water,

before you touch the metal parts.
• The steam wand is very hot after use for some time. Always check first that the component

has cooled down before touching the steam wand .
• Hot steam escapes from the steam wand. Never place your hands or other body parts

onto or under the steam wand if the selection switch is in the steam position. Hold the

frothing jug under the steam wand before you turn the selection switch to the steam position.
• Hot steam escapes from the steam wand. This component is very hot. Always be sure not

to scald on the hot steam. During steam generation never grasp the steam wand. Touch the

steam wand during operation only by the dark plastic handle.
• Never remove the steam wand from the milk, as long as steam escapes. Otherwise, hot

milk may splash out of the frothing jug. Always turn the selection switch to the standby (O)

position back, before removing the frothing jug from the steam wand.
• Always switch off before cleaning the the ppliance, disconnect the plug from the wall

outlet and let the appliance cool down.
• The water tank should not be removed during descaling.