Gastroback 42606 Design Espresso Plus User Manual

Page 22

Cleaning the Housing and the warming plate

Wipe the housing of the appliance and the warming plate with a soft, damp cloth. Wipe

dry afterwards with a clean cloth.
ATTenTiOn: Never use abrasives cleaners or harsh abrasive tools (example: pot cleaner)

to clean the appliance or its parts.

Cleaning the Drip Tray

Pull the drip tray forward, out of the appliance and empty the

drip tray (at the latest after a day or when the level indicator (red

float) indicates that the drip tray is full - see picture). Especially

when the drip tray is full, be careful not to spill the contents while

pulling out.
wARninG:

If liquids have run over or under the appliance, then pull the power cord

immediately and dry the liquid with a clean towel before putting the appliance into ope-

ration again.
For a thorough cleaning of the drip tray, you can remove the level indicator from the drip

tray. The level indicator is simply clamped.
2.

Remove the rust, the plastic insert and if necessary the level indicator from the drip tray.

You can lift the level indicator up by the grasping with the fingers in the openings on the

sides of the level indicator.
3.

Clean drip tray, rack, plastic insert and level indicator with a soft damp cloth and warm

soapy water. Dry the parts thoroughly thereafter.
4.

If nessesary insert the level indicator after cleaning back into the drip tray. For this, the

edges of the level indicator must be inserted right and left in the guides. Then press the level

indicator all the way down until it clicks into place.

Assembling the Appliance

Follow the following instructions to insert all parts after cleaning the appliance.
1.

First insert the plastic insert in the back of the drip tray. The plastic insert should aligned

with the drip tray. Place the stainless steel rack onto the drip tray. Grasp the drip tray on

both sides and slide the drip tray in the front of the appliance into the appliance base.
2.

Insert the water tank. You can lift the tank by the open lid. Make sure that the guide

grooves on the back of the water tank are engageed in the cutouts in the rear. Press the

tank down so that the water valve opens in the bottom of the water tank.
note:

While pressing down the water tank you will see that the valve cover opens upwards.

Descaling the water Tank

During regular use of the appliance calcium deposits can build up in the water tank and

in the engine, and restrain water flow. Besides, due to calcification the consumption of the

energy increases and quality of the coffee is impaired.For prevention of severe calcification,

we recommend that you descale the machine regularly, taking into account the degree of

hardness of your water. Here, the use of gentle descaler, that does not affect any metal,

is important. Please use for decalcifying only the Gastroback Premium Descaler (Art. No.: