0 specifications, Archived 4/2/10 – ETS-Lindgren HI-4455 Isotropic Field Probe (Archived) User Manual

Page 45

HI-4455 Isotropic Electric Field Probe

3.0 Specifications

POWER

Main:

IEC filtered AC power input module
110 - 240 Vac, 500 mA MAX., 50 - 100 Hz

Alternate:

Automobile cigarette lighter to 2mm power plug adapter
cord., 12.5 Vdc, 100 mA

Fuses:

250 Volt, 1.0 Amp, Type T (5 mm x 20 mm)

OUTPUT

Open

Circuit

Voltage:

Vdc

Fast Charge Pending Current:

60 mA

Fast

Charge

Current:

1400

Pulsed Trickle Charge Current:

50 mA

Output Voltage (During Fast Charge):

3 - 6 Vdc

NICD BATTERY:

3.6 Volt 3 Cell NiCd Battery, 1400 mAH (Rapid charge cells, 1.2
volts/cell); ETS-Lindgren Part #491038

ENVIRONMENTAL

Operating temperature

10 to 40

{

Humidity:

5% to 95% relative humidity, non-
condensing

POWER CABLE

This charger is shipped with a three-wire power cable. When this cable
is connected to an appropriate AC power source, it connects the chassis
to earth ground. The type of power cable shipped with each battery
charger depends on the country of destination.

Archived 4/2/10