0 unpacking and acceptance, Archived 4/2/10 – ETS-Lindgren HI-4455 Isotropic Field Probe (Archived) User Manual

Page 43

HI-4455 Isotropic Electric Field Probe

2.0 UNPACKING

AND

ACCEPTANCE

INTRODUCTION

This section contains information on unpacking and acceptance of the
491198-36 NiCd Battery Fast Charger.

Step 1. Upon delivery of your order, inspect the shipping container(s) for
evidence of damage. Record any damage on the delivery receipt before
signing. In case of concealed damage or loss, retain the packing
materials for inspection by the carrier.

Step 2. Remove the product from its shipping container. Save boxes
and any protective packing materials for future use.

Step 3. Check all materials against the packing list to verify that the
equipment received matches that which was ordered. If you find any
discrepancies, note them and call ETS-Lindgren Customer Service for
further instructions.

Be sure that you are satisfied with the contents of your order and the
condition of your equipment before using it.

Archived 4/2/10