ETS-Lindgren HI-3702 Induced Current Meter - Manual (Page 20)

20 | Operation
Computer Controlled Data Logging
The HI-3702 is
connected for data
logging as shown.
Software is available for the personal computer that simulates the HI-4416. For
information on using the HI-4416 for data logging, see the HI-4416 manual.
Use the optional RS-232 cable assembly (part #H-2239615) to connect the
HI-3702 to the HI-4413P Fiber Optic Modem. This provides direct input of
HI-3702 data into a personal computer or other data logging device.
Battery Charging
Never attempt to recharge a non-rechargeable
battery.
If the battery has been through its normal life span of approximately
1000 charge/discharge cycles, return the HI-3702 to ETS-Lindgren for
battery replacement and recalibration. For more information, see
Battery Maintenance on page 10.
1. Turn off the HI-3702.
2. Connect the battery charger to an AC outlet.