ETS-Lindgren 4340 CCTV Systems - Manual (Page 53)

Operation | 53
Operating the Battery Pack
You must charge the battery pack before using it for the first time. See
Charging the Battery Pack on page 56 for complete charging
information.
U SING THE B ATTERY P ACK
The power button located on the battery pack functions as an on/off switch for
the battery pack and the camera. When you are using the camera, the button
should be in the on position. When the camera is off or the battery pack is in
storage, the button should be in the off position. See Storing the Battery Pack on
page 55 for the charging requirements for battery pack storage.