ETS-Lindgren 4340 CCTV Systems - Manual (Page 33)

Install Optional Components | 33
7.0 Install Optional Components
Before installing any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
To install the following configurations and components:
 If you have a chamber with a shielded control room —See the next
section.
 If you have a tripod mount (for use with or without a shielded control
room) —See page 37.
 If you have a multi-camera system (for use with or without a shielded
control room) —See page 42.
A 10/100 network switch is included with your order. If you are
installing a multi-camera configuration, you will install the
10/100 network switch. If you are installing a single-camera
configuration, you will not install the switch. In that case, store the
10/100 network switch in a safe location for future expansion of your
Model 4340 Digital Camera System (CCTV).
If You Have a Chamber with a Shielded Control Room
In addition to mounting the camera from the wall or ceiling, a shielded control
room requires you to install a fiber optic-to-Ethernet converter, an Ethernet cable,
fiber optic cables, and fiber optic feedthrough connectors.
See the diagram on the following page.
To set up the computer, see page 47.