Environmental Water Systems TT 1054 TWIN TANK - Manual (Page 11)

www.EWSWATER.com
EWS, Inc. / Environmental Water Systems 4.3-11
FACTORY PRESET PROGRAMMED PARAMETERS
Regeneration Time of Day 2:00 am
#1 Tank Fill Variable time to fill only as much water as needed,
as determined by the metered valve
#2 Brine Making 15 minutes
#3 Brine Draw /Slow Rinse 60 minutes
#4 Backwash 10 minutes
#5 Fast Rinse (hidden cycle) 10 minutes
#6 Step OFF
EWS Digital 1” Metered LEVEL #1 Factory Settings
Tank Size 9 x 35 10 x 35 10 x 54 13 x 54
Resin cu. ft. 0.75 1.0 1.5 2.5
Water Hardness 25 25 25 25
Capacity in Grains - minimum setting using only 4lbs of salt per cubic foot of resin****
12,000 16,000 24,000 40,000
Bigger is not better. Grain capacity is not a measure of softener efficiency and operation
****Capacity in Grains of Hardness is a function of the EWS Environmental setting of only 4 lbs of
salt per cubic foot of resin - to reset this line item other addresses must be changed in the # 2
programming to allow system to work properly for another setting. If neede, please contact EWS,
Inc. corporate offices.
Note: this environmental efficiency setting of 4 lbs of salt per cubic foot of resin meets or exceeds the
strictest efficiency standards in the industry and meets or exceeds California SB1006 Compliance.
The idea of throwing more salt at the resin to increase the grains capacity, in order to soften your
water, is an old industry and salesman mentality, in order to sell product. Our softeners can be ad-
justed up to 60,000 grains or more.
Our level of efficiency allows our EWS softeners to operate better and more efficient, uses less salts,
uses less water and produces less brine discharge.