EFCO 8800 Series Assembly Instructions Vol.6 - Manual (Page 7)

EFCO 2009 Page 7
Series 8700 / 8800 Unitized Curtain Wall Assembly Instructions - Volume 6
Section 33 - Shadow Box Assembly
12. Apply silicone sealant into the voids formed by the panel, tape, and shadow box frame being sure to fill the void completely.
13. Tool the sealant smooth and flush with the panel and the shadow box frame. The sealant joint should be continuous around all four sides of the shadow box
panel assembly. Allow proper cure time for the sealant joint before proceeding to the next step.
Figure 9
Apply silicone
sealant.
WM86
Glazing Tape
Shadow
Box Frame
Apply silicone
sealant.
Shadow
Box Frame
Figure 10