Dyras BQ-1500 - Manual (Page 8)

BQ-1500
8
MAIN COMPONENTS
1. Thermostat
2. Indicator light “On”
3. Grill pan
4. Grill grid
5. Heating unit
6. Network cable and connector (not shown in the picture)
POWER SUPPLY
The device can only be connected to an electrical supply of 220-240 V~, 50/60 Hz, with a
protective earth contact. Always check that the mains supply matches that indicated on the data
plate of the appliance.
USING OF APPLIANCE
Using the appliance
Warning!
The barbecue grill is a thermo-electric device which develops high temperatures during operation.
These may ignite flammable materials near to it, or can cause burn injuries when touched during
operation. To prevent fire and serious accidents, remove all flammable materials from the vicinity
of the appliance before starting to use it. Also wear heat insulating protective gloves during
the use of the barbecue grill. Before starting to operate the grill, warn users of other nearby
appliances of the potential hazards.
• Unpack the appliance and remove all the packing materials.
• Inspect the appliance and the accessories carefully to verify their soundness and undamaged condition. Only
perfectly sound and damage-free appliances may be connected to the electrical mains.
• After checking the appliance and accessories, clean the barbecue grill components with a slightly damp cloth.
After cleaning, let the device completely dry out.
Before use
1. Put a heat-resistant mat under the appliance.
2. Mount the legs of the appliance. In order to do so, push the legs against the ears at the pan bottom until they
snap into their places.