CK Electric Part KX-FMC230 - Manual (Page 35)

35
Telephone
Intercom
Intercom between the handset and
the main unit
!
A 2-way intercom is available between the handset and the main unit.
Paging the main unit from the handset !
1 Handset:
Press
(INTERCOM) , then talk.
¡ The INTERCOM indicator lights.
2 Main unit:
When the other party’s voice is heard,
answer through the microphone.
¡ During the intercom, the main unit’s display
will show:
3 Handset:
To end the intercom, press
(INTERCOM) .
INTERCOM CALL
Paging the handset from the main unit (handset locator) !
Using this feature, you can locate the handset if misplaced.
1 Main unit:
Press
(LOCATOR/INTERCOM) .
¡ The IN USE indicator flashes.
¡ The handset beeps for 1 minute.
¡ To stop paging, press
(LOCATOR/INTERCOM) again.
2 Handset:
Press
(INTERCOM) to answer.
3 Main unit:
Speak into the microphone.
¡ During the intercom, the main unit’s display
will show:
4 Handset:
To end the intercom, press
(INTERCOM) .
INTERCOM CALL
During the intercom
¡ Intercom calls can only be ended by the handset.
¡ If the handset user has difficulty hearing the main unit user, decrease the speaker volume by pressing
(VOLUME) ( ).
¡ If two tones sound, an incoming call has been received. To answer, press (TALK) on the handset or
(SP-PHONE) on the main unit. The intercom is ended.
(INTERCOM)
INTERCOM
indicator
(LOCATOR/INTERCOM)
and IN USE indicator
(INTERCOM)
Microphone
(VOLUME)
(SP-PHONE)
(TALK)
Microphone