DSS Networks C5468 - Manual (Page 42)

GigMAC-CPCI-3U Network Interface Cards
Gig-CPCI-3U Gigabit Ethernet Switches
Board and Driver Users Manual
DSS NETWORKS, INC. DocVersion: 1.2 Page: 42
12. SPECIFICATIONS
Connector (Models C5261-RJ, C5262-RJ, C5164, C5264, C5468): Gigabit Ethernet
(1000BaseT, 100BaseTX, 10BaseT): RJ-45 CAT5e
Connector (Model C5261-LC, C5262-LC, C5262-SC, C5263-SFP fiber): SFP, SC or
LC connector type for 50/125 or 62.5/125 micron multimode fiber or 8/125 singlemode
fiber.
Drivers:
‰ Linux 2.4 (2.4.18 – 2.4.26), Linux 2.6 (all versions)
‰ Tornado 2.0.2, Tornado 2.2 and Tornado 2.2.1 (VxWorks 5.4/5.5/5.5.1)
Status Indicators (model C5164): Per port link/activity
Status Indicators (model C5468): Per port link/activity
Status Indicators (model C5261/5262): Per port link, duplex, transmit, receive
Bus Interface:
PCI v2.2 bus master, 32/64-bit, 33/66 MHz
Dimensions: (3U CPCI Models C5164, C5261, C5262, C5468):
Standard 3U CPCI
PCI Power supply voltage: 5V or 3.3V (factory optioned), 5V is default
PCI signaling voltage: 5V and 3.3V
Performance Throughput (PCI 32/33): 118 Mbytes/sec (944 Mb) full or half duplex
sustained per port
Maximum frame rate: Over 850,000 frames per second sustained per port
Burst Rate: Up to 256 dwords (1024 bytes) over PCI bus
Host Offloading: IPv.4 checksum (UDP, TCP and IP) and optional statistics gathering
for RFC 1213 (MIB II), RFC 1398 (Ether-like MIB), IEEE
802.3 LME
Optional: Jumbo packets, 802.3x full duplex flow control with
automatic pause and priority with multiple priority queues
Link Quality Monitor: Continuously adapts to actual line conditions
by managing echo and crosstalk cancellation,
equalization, timing and skew compensation.