Dave Smith Instruments EVOLVER - Manual (Page 54)

1 All MIDI received
2 Only MIDI program changes received (along with
note/controller data)
3 Only parameters received (along with note/controller
data)
13 0 - 3 MIDI Transmit
0
Off; no MIDI is transmitted
1 All MIDI is transmitted
2 Only Program Changes transmitted
3 Only parameters are transmitted
14 0 - 16 MIDI Channel; if = 0, data received on all MIDI channels.
Otherwise = channel number 1 – 16.
Note: Parameter 15 not available, since MIDI dump requests are already defined, see
Program Dump Request on page 51.
Program Parameter Data
Parameter Range Description
0 0 - 120 Oscillator 1 Frequency, 0 – 120 in semitones (10 octave
range)
1 0 - 100 Oscillator 1 Fine Tune; 0 = -50 cents, 50 = 0 (centered), 100 =
+ 50 cents
2 0 - 102 Oscillator 1 Shape
0 Sawtooth
1 Triangle
2 Sawtooth/triangle
mix
3 – 102 Pulse Wave, Pulse width 0 - 99
3 0 - 100 Oscillator 1 Level
4 0 - 120 Oscillator 2 Frequency, 0 – 120 in semitones (10 octave
range)
5 0 - 100 Oscillator 2 Fine Tune; 0 = -50 cents, 50 = 0 (centered), 100 =
+ 50 cents
6 0 - 102 Oscillator 2 Shape
0 Sawtooth
1 Triangle
2 Sawtooth/triangle
mix
3 – 102 Pulse Wave, Pulse width 0 - 99
7 0 - 100 Oscillator 2 Level
Parameter Range Description
8 0 - 120 Oscillator 3 Frequency, 0 – 120 in semitones (10 octave
range)
9 0 - 100 Oscillator 3 Fine Tune; 0 = -50 cents, 50 = 0 (centered), 100 =
+ 50 cents
10 0 - 127 Oscillator 3 Shape 1 - 128
11 0 - 100 Oscillator 3 Level
12 0 - 120 Oscillator 4 Frequency, 0 – 120 in semitones (10 octave
range)
13 0 - 100 Oscillator 4 Fine Tune; 0 = -50 cents, 50 = 0 (centered), 100 =
54