Dave Smith Instruments EVOLVER - Manual (Page 41)

MIDI Implementation
Evolver Receives MIDI data according to the mode controls in the Main Section.
There is interaction between some of the controls to determine the overall response of
Evolver to MIDI data; these controls are repeated below:
MIDI Channel
Select which MIDI channel to send/receive data, 1 to 16. ALL
receives on any channel.
MIDI Rec: MIDI Receive – determines what MIDI data to receive.
Display MIDI Receive Operation
OFF No MIDI data received
ALL All MIDI data received
pro Only MIDI program changes received (along with
note/controller data)
par Only MIDI parameters received (along with note/controller
data)
MIDI Xmit: MIDI transmits – determines what MIDI data to send.
Display MIDI Transmit Operation
OFF No MIDI data sent
ALL All MIDI data sent
pro Only MIDI program changes sent
par Only MIDI parameters received
Poly Chain: Poly Chain is used to link multiple Evolvers into a polyphonic system
by selectively passing MIDI data through to the MIDI out jack where it can be routed
to another Evolver. Note that MIDI clocks are handled separately per the MIDI Clock
parameter. Settings:
Display Poly Chain Status
OFF MIDI operation is normal.
ALL All MIDI information is passed through to the MIDI out
jack
not Only MIDI note data is passed through to the MIDI out
jack.
MIDI Clock: Selects the MIDI clock status, and enables External sequencer triggers,
as follows:
41