Dave Smith Instruments EVOLVER - Manual (Page 17)

6 MIDI Xmit: see table MIDI transmits – determines what MIDI data to send. If
enabled Evolver will send out changes for all 128 Program Parameters in System
Exclusive (SysEx) format – see the MIDI Implementation section starting on page 41
for more information.
Display MIDI Transmit Operation
OFF No MIDI data sent
ALL All MIDI data sent
pro Only MIDI program changes sent
par Only MIDI parameters sent
7 MIDI Channel: ALL, 1…16 Select which MIDI channel to send and receive
data, 1 to 16. ALL receives on any channel.
8 MIDI Dump: see table Allows transmission of Programs over MIDI as follows:
Display MIDI Transmit Operation
ONE Send current program
BAN Send all 128 programs in current bank
ALL Send all programs in all three banks
When this knob is active, the sequencer S
TART
/S
TOP
LED will start blinking. When the
S TART /S TOP button is hit, the transmission will start. Handy for saving Programs on a
computer or sending to another Evolver. Evolver’s Program dumps include Program
and Bank numbers, so when received it will be stored in same location.
17