Copernicus SOSE1 - Manual (Page 4)

1
Front Frame Assembly x 1
You will need:
(Not to Scale)
Actual Size:
Do not tighten any fasteners, unless instructed
1
2
Build Front Frame Assembly
Turn the Front Frame Assembly upside down and slide the Whiteboard securely into the frame.
Slide the Front Frame Lower Legs into the Front Frame Assembly
Align the Whiteboard Channel with the holes connecting the Lower Legs & Frame Assembly
- Note that there is a Left & Right side Lower Leg - the holes on these pieces should face outwards
- Rotate the Whiteboard Channel into position, so that it surrounds the Whiteboard surface
- Fasten with two Bolt C’s, Washer F’s & Barrel Nut G’s
- Tighten bolts
1
2
Whiteboard Stretcher x 1
Front Frame Lower Leg x 2
1 Left, 1 Right
3
3
x 2 x 2
C F
x 2
G
Bolt C
Washer F
Barrel
Nut G
!
!
Note: hole
facing out
Note: hole
facing out,
no hole
toward the
inside
SOSE - Version E - 1 June 2009 - Copernicus Educational Products Inc.