Copernicus LW431 User Manual
Page 3
LW430 - Version A - 03 October 2014 - Copernicus Educational Products Inc.
1
Attach Casters
You will need:
(Not to Scale)
Actual Size:
Assembly
Spanner
1x
D
4x
E
4x
F
4x
5” Caster
(2 with brakes)
4x
!
Tighten firmly
?
?
Follow with large flat washer
?
Carefully thread the casters into the ends
of the outside frames. Slowly tighten by the
stem base only.
?
Tighten firmly. Make sure lock washer is
collapsed.
?
You may need to use your adjustable
wrench (Spanner Wrench) to fully tighten to
frame.
Place lock washer onto caster stem
1
F
2
End Frame
2x
D
E
End Frame
Note: it is recommended that
casters with brakes be located both
front or both rear. The rear location
is preferred to prevent children
from playing with the brakes.
!
IMPORTANT: Routine Maintenance
?
Verify regularly that casters are secure to the unit
?
Re-tighten if needed with Wrench
?
Install nut on caster stem
?
Using Spanner Wrench provided and your
own Adjustable Wrench, tighten nut against
the caster.