Code 3 Triumph - Manual (Page 12)

SIRIS™ LIgHT HEAD
TROUbLESHOOTINg
Troubleshooting
All TRIUMPH™ Light bars are thoroughly tested prior to shipment. However, should you encounter a problem during installation or during the life of
the product, follow the guide below for information on repair and troubleshooting. Additional information may be obtained from the factory technical
help line at 314-996-2800.
Note: LED light heads must be replaced as a module. There are no user serviceable parts. warranty is void if
module is disassembled
PRObLEM QUESTIONS POSSIbLE CAUSE SOLUTION
SIRIS Front Module
not operating
Are all heads out
in front or in back,
and not just a
single module out?
Yes
No
a. Front and/or Rear Cut Function powered
a. Defective module
b. Cable/Connector unplugged
a. Remove power (turn off) Front and/or Rear Cut
a. Replace module
b. Check cable & connector
SIRIS Corner Module
has one head out. NA a. Defective module
b. Cable/Connector unplugged
a. Replace module
b. Check cable & connector
Cruise Lights do not
operate NA a. No power on Cruise wire
b. Another Central Controller Function is on
a. Connect Cruise wire to switch
b. Turn off other functions
Any disassembly of any of the SIRIS™ light heads will result in loss of warranty coverage on the
equipment.
wARNINg!