Char-Broil 463271108 - Manual (Page 16)

7 On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one
1/4-20x1½” screw, 7mm lock washer, and 7mm flat
washer on each side.
Do not fully tighten screws until side shelf
installation is complete in later steps.
16 • 463271108
6
1/4-20x1½” screw
7mm lock
washer
7mm flat
washer
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Front brace
Rear upper panel
Door Pin in
downward
position
Insert front brace under control panel and between cart side panels.
Secure using two
1/4-20x1½” screws, 7mm lock washers, and 7mm
flat washers on each side.
NOTE: Do not fully tighten screws as some adjustments may
need to be made when installing Doors on step 15.