Code 3 DuoBeam II - Manual (Page 5)

5
LED Lighthead Description and Pattern Change
The DuoBeam can be populated with one of three different types of Code 3 LED's - PriZm II TM , Torus TM and
TriCore TM technologies. The PriZm TM and Torus TM lightheads are available with an integrated flash control and
do not require a separate flasher, however, all models CAN be controlled by a flasher.
PriZm II TM (Integrated flasher in lighthead)
Flash Pattern Description
1. Cycle Flash (DEFAULT)-------------Cycles through various patterns @ 70 fpm
2. NFPA Quad Flash 80 FPM----------Four Pulses per flash @ 80 fpm
3. Steadyburn------------------------------Steady-Burn
4. Five Flash 150 FPM------------------Five Pulses per flash @ 150 fpm
5. Quad Flash 150 FPM-----------------Four Pulses per flash @ 150 fpm
6. Triple Flash 150 FPM ---------------- Three Pulses per flash @ 150 fpm
7. Double Flash 150 FPM---------------Two Pulses per flash @ 150 fpm
8. Single Flash 150 FPM----------------One Pulse per flash @ 150 fpm
9. Single Flash 250 FPM----------------One Pulse per flash @ 250 fpm
10. Single Flash 375 FPM---------------One Pulse per flash @ 375 fpm
11. Triple Pop Flash 75 FPM------------ Three Pulses per flash ( 2 equal, 1 extended) @ 75 fpm
12. Quad Pop Flash 75 FPM------------Four Pulses per flash ( 3 equal, 1 extended) @ 75 fpm
13. Single Flash 75 FPM------------------One Pulse per flash @ 75 fpm
14. Double Flash 75 FPM-----------------Two Pulses per flash @ 75 fpm
15. Triple Flash 70 FPM ------------------ Three Pulses per flash @ 70 fpm
16. Quad Flash 70 FPM ------------------ Four Pulses per flash @ 70 fpm
17. Five Flash 70 FPM -------------------- Five Pulses per flash @ 70 fpm
18. Mod Flash
19. Action Flash
Momentarily short and
release to change patterns Located on front of
Integrated PCB/Light Engine
Reflector removed for clarity
The flash pattern can be changed by shorting the J4 pad with a wire or blade of
a screwdriver (shown below). The lighthead can be reset to the default by short-
ing the J4 pad for greater than 5 seconds and then releasing
This Product contains high intensity LED devices. To prevent eye damage,
DO NOT stare into light beam at close range.
Warning!
!