Code 3 87, 88, 89 Series Perimeter Lights - Manual (Page 7)

4. Disconnect the lamp assembly from the cable.
5. Insert the replacement lamp assembly into the reflector. Twist clockwise 1/8 turn until you feel the locking
features of the socket engage.
6. Test the lamp by connecting the lamp assembly to the cable. Switch the power supply on. After verifying the
tube is good, turn off the power supply.
7. Push the assembled AMP Mate-N-Lock connectors through the cut out in the vehicle for the reflector.
8. Verify the "TOP" reflector engraving is on the top of the reflector. Verify “TOP” lens engraving is on the top
of the lens. Mount the reflector and lens by installing the four screws.
Lens Cleaning
1. Remove the lens by unscrewing the four mounting screws. (When equipped with a bezel it is not necessary
to remove the bezel/reflector from the vehicle).
2. Using plain water and a soft cloth, or Code 3 lens polish and a very soft paper towel or facial tissue clean
both surfaces of the lens.
3. Because plastic scratches easily, cleaning is recommended only when necessary (about every six months).
4. Do not subject the lenses to car washes that use brushes, as these will scratch the lenses.
If attempting to clean the reflector, use only a mild glass cleaner and a very soft cloth. Do not
attempt to use any wax type products as these will burn onto the reflector and impair
effectiveness.
WARNING!
!
Options
The 87/88/89 Series Strobe and Halogen Perimeter Lighting Product Group includes the following models:
Single Products
87 Strobe tube assembly, reflector and lens choice of four lens colors: amber, blue, clear, and red. Clear
lens can be specified with optional inserted half lenses. Available in amber, blue, din blue, green and red.
87BZ Strobe tube assembly, bezel, reflector and lens choice of four lens colors: amber, blue, clear, and red.
Clear lens can be specified with optional inserted half lenses. Available in amber, blue, din blue, green
and red.
88 Halogen lamp assembly, reflector and lens choice of four lens colors: amber, blue, clear, and red. Clear
lens can be specified with optional inserted half lenses. Available in amber, blue, green and red.
88BZ Halogen lamp assembly, bezel, reflector and lens choice of four lens colors: amber, blue, clear, and red.
Clear lens can be specified with optional inserted half lenses. Available in amber, blue, din blue, green
and red.
Strobe
NFPA
7