Code 3 87, 88, 89 Series Perimeter Lights - Manual (Page 6)

2 Scene Light Filter T02211 (8 deg-12 deg
optics)
T02212 (15 deg-26 deg
optics)
2 Filter Half T02260 (Green)
T02262 (Red)
T02263 (Blue)
T02264 (Amber)
T02265 (Din Blue)
3 Reflector T04598 (Models 8788)
T07856 (Model 89)
4 Reflector Gasket T07921
5 Lamp Assembly (Strobe) T07008
(Halogen) S82110 (12v 50w red dot)
S95285 (12v 65w
Transverse black dot-
For KKK-A-1822E Model 89
only)
S85347 (24v 50w upgrade
puple dot)
S82120 (12v 35w blue dot)
6 Trim Bezel T07918
7 #10 Parts Bag T07928
8 Wiper Gasket (Not Shown) T02932
9 Bezel Gasket T07924
10 Bezel/Reflector Gasket T07940
1. Turn off power to the power supply and allow the lamp assembly to cool for 10 minutes.
2. Remove the lens by unscrewing the four mounting screws. (When equipped with a bezel it is not necessary
to remove the bezel/reflector from the vehicle)
3. Carefully grab the base of the lamp assembly and twist counterclockwise 1/8 turn. Pull straight out. (When
equipped with a bezel or the reflector is mounted separately carefully pull the connected AMP Mate-N-Lock
connectors through the socket hole. If the Mate-N-Lock connectors either disconnect or will not pull through
the socket hole, unscrew the remaining four screws and remove the bezel/reflector from the vehicle.)
Maintenance
Lamp Assembly Replacement
High voltages and /or temperatures are present inside the unit. Disconnect from power and
wait 10 minutes prior to servicing or troubleshooting. Use hand and eye protection when
changing halogen lamps or flashtubes as they are pressurized and accidental breakage can
result in flying glass. Lamps are extremely hot! Allow to cool completely before attempting to
remove. Gloves and eye protection should be worn handling halogen lamps or flashtubes as
they are pressurized and accidental breakage can result in flying glass.
WARNING!
!
Parts List
Ref No. Description Part No.
1 Lens
T07914 (Clear)
T07911 (Red)
T07913 (Blue)
T07912 (Amber)
6