Catler DF 4010 - Manual (Page 6)

• Never pour oil out of the deep fryer when
either the unit or oil is shot. Allow both
the unit and contents to cool completely
before removing oil.
• It is not recommended to add extra oil
when hot as splashing may occur.
• Always ensure the heater element and
controller are correctly positioned onto
the bowl assembly and fi lled to min/max
before connecting to a power outlet.
• Do not use the deep fryer on metal
surfaces, for example, a sink drain board.
• At no time should the deep fryer be left
unattended when in use.
• Do not place anything on top of the deep
fryer when the lid is closed, when in use
and when stored.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It is
advisable that a safety switch with a rated
residual operating current not exceeding
300 mA be installed in the electrical
circuit supplying the appliance. See your
eletrician for professional advice.
5
CATLER RECOMMENDS SAFETY FIRST