Catler DF 4010 - Manual (Page 12)

• Before cleaning the deep fryer, always
make sure the unit is disconnected from
the power outlet.
• Make sure the unit and oil are completely
cool. Do not attempt to move or carry the
deep fryer, element and control assembly
while it is hot.
• Wash the basket in hot soapy water. Dry
thoroughly.
• Remove the control assembly of the deep
fryer by lifting upwards (Fig. 5).
• Grasp each side of the removable bowl
and lift upwards (Fig. 6).
• Empty the bowl of cooled oil. As oil can
be re-used several times (depending on
type of food cooked), fi lter the oil through
a fi ne sieve.
• The removable stainless steel bowl
allows for easy cleaning. Wipe down the
bowl with absorbent paper, then a damp
cloth and a little mild detergent. Finally
wipe the bowl with a clean damp cloth
and dry with a clean dry cloth.
• Wipe over the controller assembly and
element with a damp cloth and a little
mild detergent. Finish off with a clean
damp cloth followed by a clean dry
cloth.
• The removable bowl, frying basket and
outer body are dishwasher safe.
• Wipe over the outside of the unit with a
damp cloth and a little mild detergent.
Finish off with a clean damp cloth
followed by a clean dry cloth.
• Reassemble unit for storage.
11
CARE AND CLEANING
CARE AND CLEANING
5
6
POWER CORD NEEDS TO BE FULLY EXTENDED BEFORE USE.
ALWAYS ADD THE REQUIRED AMOUNT OF OIL BEFORE SWITCHING THE
POWER ON AT THE POWER OUTLET.